Save 30%
Square outdoor LED pillar light in anthracite grey, lit with a four-sided neutral white glow
Outdoor LED light on the corner of garden decking, washing light down onto the boards
Pair of square gate post lights glowing on rendered pillars either side of a garden gate
Square pillar cap lamps lit on two white rendered gate piers outside a house at dusk
Unlit square LED pillar lamp showing the textured anthracite grey galvanised alloy finish
Close-up of the textured light panel glowing beneath the pillar light's overhanging top
Outdoor LED pillar light specification sheet with 10W power, IP65 rating and 250 × 250 × 150 mm size

iPAC

Outdoor LED Light – Square Gate Post & Pillar Cap Lamp, 10W Mains Hardwired, IP65, 4000K Neutral White, Anthracite Grey

  • 10 W integrated LED, 4000K neutral white
  • IP65-rated circuit unit for outdoor walls
  • Mains 220–240 V, hard-wired with no plug
  • Four-sided, low-glare downward glow
  • 250 × 250 mm galvanised alloy, anthracite grey
£55.70£80.00Save £24.30
In Stock
Share
Free UK DeliveryOn every order, no minimum
Ships from the UKExpedited tracked shipping
30-Day ReturnsEasy & hassle-free
Quality GuaranteedPremium-grade products

Product Information

Square Outdoor LED Pillar Light for Gate Posts, Piers and Garden Walls

A modern square LED pillar light that turns a gate post, brick pier or wall top into a soft marker after dark. The 10 W integrated LED sends 4000K neutral white light down and out through all four sides, while the overhanging anthracite-grey top keeps glare low. It is a mains light, 220–240 V and hard-wired with no plug, with an IP65-rated circuit unit, made for permanent outdoor installation by a qualified electrician.

Key Features

  • Four-sided, low-glare glow — light washes down and out from all four sides beneath the overhanging top
  • 10 W integrated LED — no bulbs to change, with 4000K neutral white for clear, welcoming light
  • IP65-rated circuit unit — dust-tight and protected against water jets for year-round outdoor use
  • Mains, hard-wired — 220–240 V with no plug, an earthed Class I fitting for a permanent installation
  • Galvanised alloy body — corrosion-resistant coated metal in a textured anthracite-grey finish
  • Neat square footprint — 250 × 250 mm and 150 mm tall, surface-mounted on a flat cap, pier or ledge
  • Architectural look — a clean cube with a floating-lid silhouette that suits contemporary homes

Where This Pillar Light Belongs

  • Gate posts and brick piers at the drive entrance
  • Garden wall tops and boundary walls
  • Patio ledges, planters and raised beds with a flat top
  • Terraces and decking edges
  • Courtyards and pathways, as a low marker light
  • Modern driveways and front gardens: outdoor lights for the house that look as good by day

Quality Assurance

Each light is inspected before dispatch for its housing finish, LED unit and fixings. The body is galvanised, corrosion-resistant coated alloy, the light source is an integrated 10 W LED and the fitting is CE marked. Installation by a qualified electrician is recommended.

TypeOutdoor square LED pillar and gate post light, surface mount
Power10 W integrated LED
VoltageAC 220–240 V
WiringMains, hard-wired (no plug); earthed Class I fitting
IP ratingIP65 (circuit unit)
Colour temperature4000K neutral white
Light distributionFour-sided downward wash, low glare
Dimensions250 × 250 × 150 mm (9.8 × 9.8 × 5.9 in), length × width × height
MaterialGalvanised, corrosion-resistant coated alloy
ColourAnthracite grey
MountingSurface mount on a flat pillar cap, pier, wall top or ledge
CareIsolate the mains supply before cleaning; wipe with a soft damp cloth
BrandiPAC
SKUIPAC-PL-MAN
EAN5061051541183

The light surface-mounts on a flat, level top: check your pillar cap, pier or ledge is at least 250 × 250 mm before ordering. It does not slip over or into a post.

  • Footprint: 250 × 250 mm (9.8 × 9.8 in)
  • Height: 150 mm (5.9 in)
  • Power: 10 W, AC 220–240 V, hard-wired
  • IP rating: IP65 (circuit unit)

Plan a mains cable route to the top of the pillar; a qualified electrician should make the connection.

Galvanised, corrosion-resistant coated alloy with an integrated LED

  • Isolate the mains supply before cleaning
  • Wipe with a soft damp cloth

  • 1 × Square LED pillar light, anthracite grey
  • 1 × Set of fixing screws
  • Photos showing two lights are for illustration: this listing is for 1 light
  • Not included: the mains supply cable, junction box, switch or installation

It needs wiring. This is a mains light for AC 220–240 V that is hard-wired, with no plug, and it is an earthed Class I fitting, so it needs an earth connection. Have a qualified electrician connect it to an outdoor-rated supply and switch. The box contains the light and a set of fixing screws; the mains supply cable and junction box are not included.

Yes. Its circuit unit is rated IP65, which means dust-tight and protected against water jets from any direction, so it is made for year-round use on exposed gate posts and walls. The body is galvanised, corrosion-resistant coated alloy in anthracite grey, and the overhanging top shades the glowing side panels.

It surface-mounts on a flat, level top at least 250 × 250 mm (9.8 × 9.8 in), such as a brick pier, pillar cap, wall top or ledge, and stands 150 mm (5.9 in) tall. It is not a post-top cap and does not slip over or into a post, so check the mounting surface is flat and level before an electrician fits it.

It gives 4000K neutral white light: crisper than a warm-white bulb, good for spotting steps and kerbs, yet soft because it washes down and out from all four sides under the overhanging top. Lit photos can look warmer on screen, but the LED is 4000K neutral white. It draws 10 W.

There is no bulb to change. The 10 W LED is integrated into the light, so there are no lamps to buy or replace, and the IP65 circuit unit stays sealed. If the light ever stops working, isolate the mains supply and ask an electrician to check the connection before anything else.

A solar light depends on how much daylight its panel catches, which is short in winter. This mains light is hard-wired at 220–240 V, so it gives the same 10 W of 4000K neutral white light every night it is switched on. The trade-off is installation: it needs a mains cable to the pillar and an electrician.

Isolate the mains supply before cleaning, then wipe the anthracite-grey housing and the glowing side panels with a soft damp cloth. Clearing leaves and cobwebs from under the overhanging top every few months keeps the four-sided glow even and the finish looking new.

Delivery is free to every country we ship to: UK orders arrive in 3–5 business days, Europe in 4–8, the USA in 6–10, and Canada and Australia in 8–12 business days. If it is not right for you, you can return it within 30 days of delivery.
£55.70

Dress your outdoor living

Patio Cushions, Covers & More

Refresh your outdoor space with our range of premium patio accessories. From ultra durable rattan seat & back cushions to plush fabric covers — built for comfort, designed to last.

Shop the full range and make every moment outside count.